Prepar3D模拟飞行

标题: 求助，关于airtrack不能在P3D使用的问题 [打印本页]

作者: shenwei4513 时间: 2017-3-28 14:14
标题: 求助，关于airtrack不能在P3D使用的问题
本帖最后由 shenwei4513 于 2017-3-28 14:16 编辑

之前一直有在XP的FSX上用，都很正常，现在转P3D就用不了

关于P3D网站说明如下，按他说的做了就是不行、

[size=13.3333px]For this you will need to grab the FSX manual installation plugin file and install it manually. Other than that, it works just like FSX.

[size=13.3333px]Here's a brief how-to on how to make it work:

[size=13.3333px]1) Install or have Prepar3D (goes without saying)

[size=13.3333px]2) Download the AirTrack-FSX-v1.4-gauge.zip file from the downloads section of this web site. Open it.

[size=13.3333px]3) Copy the airtrack.gau file to the gauges sub-directory of the main Prepar3D folder

[size=13.3333px]4) On the "gauges" directory of the Prepar3D folder there should be a file called missionpanels.cfg ; open it with Notepad

[size=13.3333px]5) Below the line that says Window09=Countdown add a new line with:

[size=13.3333px]Window10=AirTrack

[size=13.3333px]6) At the end of the file add the following lines:

[size=13.3333px][Window10]
size_mm=10, 10
window_pos=0.01, 0.01
background_color=0,0,0
ident=10099
visible=1
update_rate=10
gauge00=airtrackFSX!AirTrack, 0, 0

[size=13.3333px]7) Save the file; this might be a bit tricky due to permissions but it's doable; I had to save it on the desktop and move it back, overwriting the original file.

[size=13.3333px]And that's it; launch Prepar3D and you should see a small white square on the top-left corner of the screen when you launch the default plane; on AirTrack you should see an entry in data sources saying: "FSX on X.X.X.X"; tap on it to connect to P3D.

[size=13.3333px]Tested on Windows 7 - 64 bits.

[size=13.3333px]If this doesn't work for you, it might be something else; check your plane files (you may need to add the above to specific panel.cfg files or so) and your connectivity, anti-viruses, firewalls, etc.

[size=13.3333px]If still having troubles, don't hesitate to contact support.

欢迎光临 Prepar3D模拟飞行 (https://prepar3d.cn/)